FREE UK Mainland Delivery on orders over £30 | 90 Day No Quibble Returns | Click For Worldwide Shipping Info | Order by Phone: 01629 258240
You’ll earn 0 reward points with this purchase.
Electrify Your Airframe
Power up your model with this electronics pack that works with your radio system of choice. Hook up the motor, speed controller, servos and accessories and install them into your aircraft to build your own radio control model.
Plug and Play
No Soldering is required. Simply plug the system together using the pre-soldered connectors.
The Speed (C) Pack
The Speed 2215 motor that comes with this pack is perfect for powering sportier aircaft such as our 40" Balsa Basics Spitfire.
In this kit you get all of the onboard electronics you'll need to electrify a Balsa Basics airframe along with any necessary extra hardware.
- 1 x Emax 2215 1180kv brushless outrunner motor
- 1x Prop Nut
- 1x Prop Adaptor
- 2x Prop washers
- 1x Prop Shaft
- Motor Hardware
- 1 x Emax ESC (30A)
- 1 x XT60 Connector
- 2 x Emax 1045 Propeller (CCW and CW)
- 4 x Emax 9g Servo
- 2 x Servo Extensions
- 1x Servo Y Connector
- 1 x Motor mount ‘X’ plate
What You'll Need to Complete
Along with an airframe to install these electronics into, you will also need a radio system and battery
- Transmitter and reciever
Be the first to review this product.Leave a review