Veron Aeronca Champion - 23" Replica Balsa Kit
Build and fly the replica Veron Aeronca Champion | Rubber-powered | Includes glue and tissue covering
✓ In stock
❌ Sorry! We're out of stock
FREE UK Mainland Delivery on orders over £30 | 90 Day No Quibble Returns | Click For Worldwide Shipping Info | Order by Phone: 01629 258240
You’ll earn 0 reward points with this purchase.
AT A GLANCE
Wingspan: 23" (584mm)
Ease of build: Intermediate
Flying skill: Intermediate
Control type: Free-flight
Power system: Rubber
VERON AERONCA CHAMPION
The Aeronca Champion or "Champ" was an American single-engined two-seater with fixed landing gear, designed primarily as a trainer. It entered production in 1945 and is still found on many a small airfield with its main competitor, the Piper Cub.
This kit is a laser-cut replica of the original Veron Tru-Flite Series model of an Aeronca Champion. Construction of the model from this kit uses the traditional method of "stick and tissue", that consists of a built up balsa wood skeleton (framework), covered with a tissue skin. The balsa frameworks are built over a plan that is printed at the exact scale of the model, which is in essence a real engineering drawing. Power is provided by rubber strip motor that is wound up before flight. Free flight means just that - once the model is launched, it is on its own. It must follow a predetermined flight path established when the model is initially adjusted for flight or "trimmed". This type of traditional building technique and flying requires a degree of patience and skill, but is extremely rewarding.
The model shown above was expertly built and photographed by Rob Brennan.
INCLUDED IN YOUR KIT
- Balsa wood sheets with precise laser cut parts and strip wood.
- One 150 mm diameter plastic propeller.
- One pre-bent motor hook and shaft.
- One low friction plastic nose bushing for the propeller
- Pair of 22 mm plastic wheels.
- Acetate sheet for cabin windows.
- Piano wire for the main undercarriage and tail wheel.
- One motor peg.
- F.A.I. 3/16" rubber motor strip.
- White domestic tissue covering.
- Full size printed plan with instructions
- PVA glue
Only Suitable For Ages 14+
Choking Hazard - Contains small parts, keep out of reach of children.
Most orders are shipped via Royal Mail’s Tracked 48 service.
For larger or heavier orders, we use UKMail/DHL to deliver your package on a Next Working Day service.
Shipping is free to UK Mainland addresses for orders over £30.00, otherwise we charge £6.00 for Royal Mail Tracked 48 parcels and £12.00 for UKMail/DHL Nest Working Day.
Items that fit within Royal Mail International Tracked Medium Parcel parameters (59cm x 17cm x 15cm weighing less than 2kg) can be sent to most countries outside the UK.
For example up to 3 of our smaller 18” wingspan kits can fit into one of these parcels.
A parcel like this currently costs around £14 to Europe and around £18 to send to the USA and will take up to 3 weeks to arrive. This is because Royal Mail hands over the parcel to the local Post Office service for your country who have to clear it through customs and then deliver it to you.
The Royal Mail tracking code also transfers over to the tracking for your country’s postal service.
For items that do not fit within Royal Mail International Tracked Medium Parcel parameters, we use standard international couriers such as DHL, FedEx and UPS.
These companies use something called volumetric weights to calculate the cost of shipping.
For example, a Balsa Basics RC bundle kit that measures 102cm x 34cm x 16cm and weighs 2.5 kg is actually calculated at 14kg!
This makes these very expensive to send outside the UK - a large kit can cost nearly £40 to send to France.
Be the first to review this product.Leave a review