Vintage Model Co
Electrify Your Airframe
Power up your model with this electronics pack that works with your radio system of choice. Hook up the motor, speed controller, servos and accessories and install them into your aircraft to build your own radio control model.
Plug and Play
No Soldering is required. Simply plug the system together using the pre-soldered connectors.
The Standard (B) Pack
The standard 2213 motor that comes with this pack is ideal for powering models such as our Balsa Basics Cub and Balsa Basics Super Cub. It can also be used on models such as the Balsa Basics Spitfire but will deliver less performance than the (C) 2215 "Speed" motor recommended for that airframe.
In this kit you get all of the onboard electronics you'll need to electrify a Balsa Basics airframe along with any necessary extra hardware.
- 1 x Emax 2213 935kv brushless outrunner motor
- 1x Prop Nut
- 1 x Emax ESC (30A)
- 1 x XT60 Connector
- 2 x Emax 1045 Propeller (CCW and CW)
- 4 x Emax 9g Servo
- 2 x Servo Extensions
- 1x Servo Y Connector
- 1 x Motor mount ‘X’ plate
What You'll Need to Complete
Along with an airframe to install these electronics into, you will also need a radio system and battery
- 42" (1070mm)