Slight Seconds Supermarine Spitfire NightfighterMagnificent Flying Machines
✓ In Stock
Slight Seconds Spitfire Nightfighter
At VMC, absolute quality is highly important to us.
We thoroughly check each sheet of cut parts for unwanted artefacts from the laser cutting process and occasionally we find rejects.
What's wrong with them? Sometimes there is a slightly burned edge, sometimes the laser hasn't fully cut through a part.
It's all very trivial for the average modeller who can fashion the odd part from the balsa sheet offcuts.
It doesn't feel right to simply waste these parts by throwing them away, so instead we are offering them to those of you out there who don't mind having a few questionable parts and would rather have a big discount.
At a Glance
- Power System - Rubber Free Flight
- Wingspan - 18" (460mm)
- Approximate AUW - 25g
- Difficulty - Beginner
Three balsa sheets with precise laser cut parts and strip wood (some or all of the sheets may have defects).
PVA glue for building the wooden frames.
One 150mm diameter plastic propeller.
One pre-bent motor hook and shaft.
Three low friction plastic nose bushings - one for the propeller and two for the undercarriage wheels.
One vacuum formed canopy and spinner.
Piano wire for the main undercarriage and tail wheel legs.
One motor peg (cocktail stick or toothpick).
Rubber motor strip.
Tissue to cover the model.
Parts reference sheet (W), full size summary plan sheet (X), scheme diagram sheet (Y) and scheme markings (Z) printed on lightweight paper.
SPITFIRE NIGHTFIGHTER ORIGINAL INSTRUCTION BOOKLET COPY
Download a spare copy of the instruction booklet included in your kit here:Spitfire Nightfighter Instruction Booklet
SUPERMARINE SPITFIRE NIGHT FIGHTER MARKINGS SHEET
Click the link below to download a pdf version of the markings sheet included in the Spitfire Night Fighter kit.
The markings sheet should fit onto a single A4 page and may be printed onto your own paper or decal transfer sheet.
SPITFIRE PATTERNS SHEET
Click the link below to download a pdf version of the patterns for acetate and paper/card parts originally drawn on the plan.
This will save you from having to cut into your beautiful plan!
Built, filmed, edited and produced by the amazing Rob Brennan
The illustrated instructions below are available for you to view, download or print out for free.
They do not replace the instruction book but can be used alongside it.
We hope you find them useful!
Please note the illustrated build was for a White Spitfire not the Nightfighter. The build is identical, with the only changes being the colour of the tissue and the markings.
MAIN PARTS & FRAMES BUILDING SCHEDULE
The Centre Section [Download]
The Main Wing Panels [Download]
Completing the Wings [Download]
The Tail Plane (Stabiliser) [Download]
The Fin & Rudder [Download]
The Fuselage [Download]
The Nose Block [Download]
Finishing the Fuselage [Download]
The Wheels, Undercarriage & Spinner [Download]
Radiator, Oil Cooler, Exhausts, Air Inlet & Fillet Pieces [Download]
The Fin, Rudder & Tail Plane [Download]
The Wings [Download]
The Fuselage [Download]
- 18" (460mm)