Recently Viewed

KK Skystreak 26

KK Skystreak 26
  Zoom
KK Skystreak 26KK Skystreak 26KK Skystreak 26KK Skystreak 26

FEATURES

Original Manufacturer:  Keil Kraft
Style:  Control Line
Wingspan:  26"
Ease of Build:  Intermediate
Power:  Diesel/Nitro

Your Price:  £44.95
+
PAW 049 Mk1 Standard Ball Bearing Diesel EnginePAW 049 Mk1 Standard Ball Bearing Diesel Engine
Domestic Tissue - RedDomestic Tissue - Red
Domestic Tissue - Dark YellowDomestic Tissue - Dark Yellow
HMG Gloss Fuel Proofer 125mlHMG Gloss Fuel Proofer 125ml
HMG Cellulose Thinners 125mlHMG Cellulose Thinners 125ml
Doping BrushDoping Brush

KK SKYSTREAK 26

The KK Skystreak 26 is one of the longest selling, all time Keil Kraft classic control line stunters, featuring "Knock Off", banded on wing (optional), for 0.75 - 1cc (.049 - .06cu.in) diesel and glow-plug motors.

Very lightweight, traditional, straightforward construction, with unusual, but attractive, swept-back wing.

An exciting stunter, but also exceptionally stable, particularly in inverted flight.

All parts are precision laser-cut, for accurate construction.

A great first stunt control line model.

FULL KIT CONTAINS

Plotted plans
Precision laser-cut parts
Balsa stripwood
Engine bearers
Piano wire
Hinges
Bell-crank assembly
Lead out wires
Canopy
White tissue covering

Please note: Model pictured expertly built by Pete Sanders features engine, fuel tank, fuel lines, propeller, spinner, markings and coloured covering not included in the kit.

Pete Sanders makes the following comments that may help with your build:

If a modern PAW .049 or .06 is used, the engine bearers will have to be set slightly closer together, from 23 mm to 21 mm as the crank case is narrower than vintage diesels. 2 mm will have to be pared off the top engine bearer to accommodate the fuel tank in it's proper position in the tank bay only. The gap on the top and bottom of the beech bearers, can be filled with a strip of scrap balsa.

The tail plane and elevator can be made from 2.5mm sheet balsa (3/32") to prevent it warping and it is stronger.
 
The ply bellcrank and elevator horn should be given a thin coat of epoxy to stiffen and strengthen them.
 
The Skystreak 26 is a lovely model to build, with lots of traditional, vintage construction features.
 
I seem to remember that the Keil Kraft kit I built had to be modified to get the canopy to fit.
 
All I did was raise the sides of the cockpit by 5 mm, using a piece of 5 mm x 1.5mm scrap balsa and it would be best to run the front planking a bit further into the cockpit, say 3mm, then the canopy fits just fine. It shouldn't take much time to adjust the plan to aid the builder.

The Full kit for the KK Skystreak 26 fits into a Small Box. Please use the table below to calculate your likely shipping costs

 

Package Size (approx)

UK (including Highlands and Islands)

Mainland Europe

Rest of The World

Envelope A4

£3.95 - Free for orders over £19.99

£3.95

£3.95

Small Box (450mm x 150mm x 50mm)

£3.95 - Free for orders over £19.99

£5.75

£7.50

Medium Box (980mm x 150mm x 80mm)

£3.95 - Free for orders over £19.99

£38.00

£50.00

Large Box (980mm x 300mm x 80mm)

£3.95 - Free for orders over £19.99

£55.00

£75.00

Flammable/hazardous materials UK ONLY £6.25 - reduces to £3.00 for orders over £19.99 NO DELIVERY NO DELIVERY

 

For UK deliveries we use either MyHermes  , Royal Mail  or UKMail.

Flammable and hazardous materials are shipped to the UK only using UKMail courier, which carries a premium.

Internationally we use Royal Mail for smaller parcels and envelopes and we use whichever of the big couriers are cheapest for a particular size and destination. We always send all of our kits insured and all but the smallest are also tracked.

For international orders, you are responsible for any import duties or taxes applicable in your country.

We notify you as soon as your order has been despatched and, if applicable, you will be sent the tracking number. 

If for whatever reason you are not satisfied with your purchase you can return it within 14 days for a full no quibble refund. 

Please Note : Most of our kits are made to order, this means it can sometimes take up to 14 days before they are despatched. If you need your kit quicker than that, e.g. as a birthday present, please drop us an email at sales@vintagemodelcompany.com and we will do our absolute best to accommodate you.

 

 

 

SaveSaveSave

Save

Be the first to Write a Review for this item!


Customers who bought this item also bought:


Related Products
Domestic Tissue - Red

Domestic Tissue - Red£0.50  (1)

HMG Gloss Fuel Proofer 125ml

HMG Gloss Fuel Proofer 125ml£4.99

HMG Cellulose Thinners 125ml

HMG Cellulose Thinners 125ml£3.99

Doping Brush

Doping Brush£1.99