Wingspan:  36.5"



Sorry - Out of Stock

  (1 Review)
Your Price:  £44.95
PAW 19 Mk2 Standard Plain Bearing Diesel EnginePAW 19 Mk2 Standard Plain Bearing Diesel Engine
Domestic Tissue - BlackDomestic Tissue - Black
Domestic Tissue - Dark YellowDomestic Tissue - Dark Yellow
HMG Gloss Fuel Proofer 125mlHMG Gloss Fuel Proofer 125ml
HMG Cellulose Thinners 125mlHMG Cellulose Thinners 125ml


The Peacemaker is a true, all time great control line stunter, designed to take popular 2.5 - 3cc diesel and glow-plug motors, designed by the great George Aldridge.

A profile model, with straightforward built-up construction, with all parts precision laser-cut, for an accurate build.

Sparkling stunt performance, as would be expected, but also very stable, providing a model suitable for stunt beginners and expert alike.

A real aeromodelling classic.


Plotted Plan
Laser cut balsa wood and ply parts
Engine bearers
Balsa strip wood
Piano wire for controls and undercarriage
1 3/4" semi-pnematic wheel
Elevevator horn and bellcrank assembly with 20swg piano wire leadouts
Cloth hinge tape


The Full kit for the Peacemaker fits into a Medium Box. Please use the table below to calculate your likely shipping costs


Package Size (approx)

UK (including Highlands and Islands)

Mainland Europe

Rest of The World

Envelope A4

£3.95 - Free for orders over £19.99



Small Box (450mm x 150mm x 50mm)

£3.95 - Free for orders over £19.99



Medium Box (980mm x 150mm x 80mm)

£3.95 - Free for orders over £19.99



Large Box (980mm x 300mm x 80mm)

£3.95 - Free for orders over £19.99



Flammable/hazardous materials UK ONLY £6.25 - reduces to £3.00 for orders over £19.99 NO DELIVERY NO DELIVERY


For UK deliveries we use either MyHermes  , Royal Mail  or UKMail.

Flammable and hazardous materials are shipped to the UK only using UKMail courier, which carries a premium.

Internationally we use Royal Mail for smaller parcels and envelopes and we use whichever of the big couriers are cheapest for a particular size and destination. We always send all of our kits insured and all but the smallest are also tracked.

For international orders, you are responsible for any import duties or taxes applicable in your country.

We notify you as soon as your order has been despatched and, if applicable, you will be sent the tracking number. 

If for whatever reason you are not satisfied with your purchase you can return it within 14 days for a full no quibble refund. 

Please Note : Most of our kits are made to order, this means it can sometimes take up to 14 days before they are despatched. If you need your kit quicker than that, e.g. as a birthday present, please drop us an email at and we will do our absolute best to accommodate you.





Average Rating (1 Review):  
Write a Review and share your opinions!

Well presented classic
Monday, 1 August 2016  | 

Not much that can be said about the Peacemaker that hasn't already been said - it is truly a classic that everyone should have at some time. The kit provides excellent wood selection and is nicely laser cut without too much burning - loads better than some kits from the US that I have built. The grain direction on the wing trailing edge extensions runs span-wise, when it ought to run parallel with the trailing edge, but this is hardly a major issue. I chose to glass/epoxy the fuselage and tail feathers for strength and added an inboard cheek section (as per combat model engine pod construction) to stiffen the fuselage/engine/wing joint area. I also covered the wing in nylon. Ready to fly she weighs in at just under 20 oz with a PAW 2.5 TBR - not too bad and it certainly underlines the good wood choice. Incidentally, running on a 9x4 APC prop the model copes with 6oft lines in any conditions up to a strong breeze (20kts), in fact it is a bit too fast on 52ft lines! With the CofG in the right spot and a competent pilot it can be persuaded to do most manoeuvres in 'the book' but is mostly just a really fun 'plane to fly!



Thanks for taking the time to review the Peacemaker.

We have been constantly updating our laser cut files and components to improve the Peacemaker kit and it's great to hear that you enjoyed the kit and build.

We'd be really grateful if you could email us a couple of pictures of the finished model for use on the website.

Customers who bought this item also bought:

Related Products
Domestic Tissue - Black

Domestic Tissue - Black£0.50

HMG Gloss Fuel Proofer 125ml

HMG Gloss Fuel Proofer 125ml£5.94

HMG Cellulose Thinners 125ml

HMG Cellulose Thinners 125ml£3.99

Doping Brush

Doping Brush£1.99

  Sorry - Out of Stock