Balsa Basics Super Cub - 42" Kit + Electronics

Balsa Basics Super Cub + electronics
42" (1047mm) Wingspan
Free UK Mainland Delivery
Made in Britain

Balsa Basics Super Cub - 42" Kit + Electronics

Laser cut wooden parts to build a 4-channel radio controlled Super Cub | Includes electronics & covering

✓ In stock

❌ Sorry! We're out of stock but contact us for details.

£0.00
£162.00
£162.00

QTY

FREE UK Mainland Delivery on orders over £30 | 90 Day No Quibble Returns | Click For Worldwide Shipping Info | Order by Phone: 01629 258240

You’ll earn 0 reward points with this purchase.

AT A GLANCE

Brand: Balsa Basics
Wingspan: 42" (1047mm)
Ease of build: Beginner
Flying skill: Intermediate
Control type: Radio Control
Power system: Electric
Scale: 1:11
All up weight: 800g

SUPER CUB KIT + ELECTRONICS

This airframe with electronics kit builds into a simple 4-channel RC model of the Super Cub trainer.

With a 42” (1047mm) wingspan and wing attached with rubber wing bands, it’s large enough to see and fly in a moderate breeze, yet small enough to transport easily in your car.

Easy to put together, this bundle includes our "B" Standard Electronics Pack with 2213 935kv brushless motor, ESC, 4 x servos and 1045 propeller.

Simply add your radio gear and battery of choice.

Now includes 2m roll of Cub Yellow polyester heat-shrink covering!

INCLUDED IN YOUR KIT

  • 1x sheet of 3mm ply parts
  • 7x sheets of balsa parts
  • Landing gear wire
  • Push rod wire
  • Control horns
  • Thin wooden dowel
  • Emax MT2213-920KV Motor
  • 30A ESC
  • Emax 1045 propeller
  • 4x 9g Servos
  • 1x XT60 battery connector
  • Motor hardware
  • Servo extension wires
  • 2x 2.5" semi-pneumatic rubber wheels
  • Self-adhesive markings sheet
  • 2m roll of Cub Yellow polyester heat-shrink covering

UK SHIPPING

Most orders are shipped via Royal Mail’s Tracked 48 service.

For larger or heavier orders, we use UKMail/DHL to deliver your package on a Next Working Day service.

Shipping is free to UK Mainland addresses for orders over £30.00, otherwise we charge £6.00 for Royal Mail Tracked 48 parcels and £12.00 for UKMail/DHL Nest Working Day.

INTERNATIONAL SHIPPING

Smaller items

Items that fit within Royal Mail International Tracked Medium Parcel parameters (59cm x 17cm x 15cm weighing less than 2kg) can be sent to most countries outside the UK.

For example up to 3 of our smaller 18” wingspan kits can fit into one of these parcels.

A parcel like this currently costs around £14 to Europe and around £18 to send to the USA and will take up to 3 weeks to arrive. This is because Royal Mail hands over the parcel to the local Post Office service for your country who have to clear it through customs and then deliver it to you.

The Royal Mail tracking code also transfers over to the tracking for your country’s postal service.

Larger items

For items that do not fit within Royal Mail International Tracked Medium Parcel parameters, we use standard international couriers such as DHL, FedEx and UPS.

These companies use something called volumetric weights to calculate the cost of shipping.

For example, a Balsa Basics RC bundle kit that measures 102cm x 34cm x 16cm and weighs 2.5 kg is actually calculated at 14kg!

This makes these very expensive to send outside the UK - a large kit can cost nearly £40 to send to France.

PRODUCT REVIEWS

Matt

I loved the build of this, it was so straight forward and easy. Mods make were to reinforce the fuselage where the wing dowels go through, a couple of washers behind the motor to give some right sided offset and the addition of a larger rudder servo and tail steering. The cub flies like a dream. When the wind picks up it does get buffeted about a bit though. A great introduction to balsa RC plane building.

Leave a review

Leave a review

close