Everything You Need in One Click*
This is an all in one starter package with all the gear you need to kick start you into the radio control hobby. With an easy to build and easy to fly model kit, motor, speed controller, servos, a transmitter and receiver set, battery, charger, yellow covering material, sticker sheet and even some rubber wheels, you don't need to go anywhere else for electronics or hardware - it's all here! Investing in a great flying model with electronics and gear you can use in future projects is a great way to go.
Please note: due to shipping restrictions, orders to the countries outside the UK will not include a battery.
A Great 'Build-it-Yourself' Trainer
The Super Cub is the Balsa Basics Cub with a different wing that includes ailerons controlled with two extra servos. You can build this aircraft from start to finish in a matter of hours (although you can take your time sanding, detailing and finishing). Chunky components result in a sturdy airframe that is intuitive to assemble.
In terms of flying, the Balsa Cub's predictable characteristics and auto-pilot like handling makes it incredibly easy to learn on! It almost flies itself - meaning you need only use small inputs on the controls to point the aircraft in the right direction. Most of the time the Cub is happiest cruising along at minimum throttle, however, it can also perform basic aerobatics such as loops and wingovers. Flight times with the recommended battery can be up to 20 minutes on calm days. With a large wingspan, you’ll also be able to take on windier conditions. Even if you are an expert builder and pilot, this is a great aircraft to keep in your squadron.
Build It with Video Instructions
Unlike many of our other more complicated kits, the Balsa Basics Super Cub doesn't need to be built over a plan and can be constructed on a normal sized table with some basic tools. All you need is to follow this video along step-by-step.
Included in the Bundle
42" Balsa Basics Super Cub Kit
Easy to build, easy to fly.
Electronics Power Pack
This plane is designed to work with our standard power electronics which includes motor, Electronic Speed Controller (ESC), servos and more.
Battery and Charger
The pack comes with a 3s LiPo battery that will provide you with over 15 minutes of flying and a balance charger that is easy to use. Simply plug in the battery to start charging.
Transmitter Set
We're providing you with a fantastic 8 channel (yes 8!) entry level radio with plenty of features. It's simple but it can grow with you. Not only do you get a transmitter, you also get a receiver.
Covering
To finish your Cub, you'll need to apply covering. We've included a roll of heat-shrink covering in the kit for a quick and easy finishing process. You can of course use alternative coverings if you prefer.
Wheels
This kit comes with a pair of quality 2.5" semi-pneumatic rubber wheels for smooth take-offs and easy landings.
Kit Contents:
- 1x Sheet of 3mm ply parts
- 7x Sheets of balsa parts
- Landing gear wire
- Push rod wire
- Control horns
- Thin wooden dowel
- 1x Emax MT2213-920KV Motor
- 1x 30A ESC
- 1x Emax 1045 propeller
- 4x 9g Servos
- 1x XT60 battery connector
- Motor hardware
- Servo extension wires
- 1x RadioLink 8ch Transmitter
- 1x RadioLink receiver
- 1x 11.1V 1500mah 20C 3s Lipo Battery with XT60 connector
- 1x Lipo Charger AC 1.2A 11W 2-3s
- 1x roll of heat shrink polyester covering
- 2x 2.5" semi-pneumatic rubber wheels
- Set of self-adhesive stickers
Detailed Specs
Wingspan - 42" / 1070mm
Build Skill Level - Beginner
Flying Skill Level - Beginner
Channels - 4 (throttle, rudder and elevator)
Power System - Electric Brushless
Recommended Motor - Emax MT2213-920KV (approximately 150w)
Propeller Size - 1045
Recommended ESC - Emax 30A
Recommended Battery - 1300mah-2200mah 3s Lipo
Servo Size - (4x) 9g
*Includes all the materials, hardware and electronics you need. You will need to provide your own tools for assembling the kit such as a craft knife, sandpaper, scissors and a soldering iron.
BALSA BASICS CUB INSTRUCTIONS
Download written instructions for the Balsa Basics Super Cub here:Balsa Basics Super Cub Instructions
- Wingspan:
- 42" (1070mm)
