Balsa Basics Super Cub - 42" Full Kit RC Bundle

Balsa Basics Super Cub Full Bundle
42” (1047mm) Wingspan
Balsa Basics Super Cub
Free UK Mainland Delivery
Balsa Basics Super Cub front view
Made in Britain
Balsa Basics Super Cub rear view
Balsa Basics Super Cub aileron
Balsa Basics Super Cub aileron servo

Balsa Basics Super Cub - 42" Full Kit RC Bundle

Build and fly your first 4 channel balsa RC plane - the Super Cub trainer | 4 Channel RC | Includes Electronics, Radio Gear & Covering

✓ In stock

❌ Sorry! We're out of stock but contact us for details.


FREE UK Mainland Delivery on orders over £30 | 90 Day No Quibble Returns | Click For Worldwide Shipping Info | Order by Phone: 01629 258240

You’ll earn 0 reward points with this purchase.


Brand: Balsa Basics
Wingspan: 42" (1047mm)
Ease of build: Beginner
Flying skill: Intermediate
Control type: Radio Control
Power system: Electric
Scale: 1:11
All up weight: 800g


Based on the same fuselage as our 3 channel Balsa Basics Cub, the Super Cub adds an aileron wing to give the perfect stepping stone to our Balsa Basics warbirds.

Easy To Build

Designed for beginners, you can build the Super Cub in just a few hours. The chunky, precision laser-cut parts fit together seamlessly to build up a sturdy airframe.

The fuselage is built as a box with strong, interlocking ply formers and the wing “self jigs” around a plywood spar. Ailerons are built into the wing and attached using mylar hinges connected to wing mounted servos.

Easy To Fly

The Super Cub flies in the same predictable way as its 3 channel sibling giving you plenty of time to get familiar with a 4 channel aileron set up.

Like the Cub, you need only small inputs on the controls to point the aircraft in the right direction and the Super Cub will happily cruise along at minimum throttle.

With the addition of ailerons, the Super Cub can perform even more aerobatically allowing for tighter loops and wingovers.

Flight times with the recommended battery can be up to 20 minutes on calm days.

The large 42” (1047mm) wingspan allows you to take on windier conditions and a pair of quality 2.5" semi-pneumatic rubber wheels make for smooth take-offs and easy landings.

If you're thinking of taking on a Blasa Basics Spitfire or similar warbird, this is the perfect stepping stone.


  • 1x sheet of 3mm ply parts
  • 7x sheets of balsa parts
  • Landing gear wire
  • Push rod wire
  • Control horns
  • Thin wooden dowel
  • Emax MT2213-920KV Motor
  • 30A ESC
  • Emax 1045 propeller
  • 4x 9g Servos
  • 1x XT60 battery connector
  • Motor hardware
  • Servo extension wires
  • RadioLink 8ch Transmitter/Receiver
  • 2m roll of Cub Yellow Polyester heat shrink covering
  • Pair of 2.5" semi-pneumatic rubber wheels
  • Self-adhesive markings sheet


  • 1x 11.1V 2200mah 20C 3s Lipo Battery with XT60 connector
  • Battery charger
  • Glue/Adhesives
  • Modelling iron or alternative to attach covering


Most orders are shipped via Royal Mail’s Tracked 48 service.

For larger or heavier orders, we use UKMail/DHL to deliver your package on a Next Working Day service.

Shipping is free to UK Mainland addresses for orders over £30.00, otherwise we charge £6.00 for Royal Mail Tracked 48 parcels and £12.00 for UKMail/DHL Nest Working Day.


Smaller items

Items that fit within Royal Mail International Tracked Medium Parcel parameters (59cm x 17cm x 15cm weighing less than 2kg) can be sent to most countries outside the UK.

For example up to 3 of our smaller 18” wingspan kits can fit into one of these parcels.

A parcel like this currently costs around £14 to Europe and around £18 to send to the USA and will take up to 3 weeks to arrive. This is because Royal Mail hands over the parcel to the local Post Office service for your country who have to clear it through customs and then deliver it to you.

The Royal Mail tracking code also transfers over to the tracking for your country’s postal service.

Larger items

For items that do not fit within Royal Mail International Tracked Medium Parcel parameters, we use standard international couriers such as DHL, FedEx and UPS.

These companies use something called volumetric weights to calculate the cost of shipping.

For example, a Balsa Basics RC bundle kit that measures 102cm x 34cm x 16cm and weighs 2.5 kg is actually calculated at 14kg!

This makes these very expensive to send outside the UK - a large kit can cost nearly £40 to send to France.


Be the first to review this product.

Leave a review

Leave a review