Brand New to the Vintage Model Co
This aircraft is the first in a range of foam models with a vintage twist.
Online instructions can be found here.
A Blast from the Past
Complete airframe kit for those who already have their own electronics and R/C gear.
The Phantom is a fun sporty 3ch racer model inspired by a traditional control line model of the same name.
Vintage Foam models are made from a composite of foam boards sheet parts and strong laser cut ply components. They are designed to go together rapidly and provide a friendly and forgiving model for teaching yourself to fly without intimidation.
This model is highly customisable and can be painted however you'd like. We recommend using spray paint.
There is easy access to the battery and motor.
Included is a vacuum-formed canopy.
Wing bands (included) secure the wing in place while allowing access to the receiver and other electronics.
The servos are also easily accessible for straightforward adjustments at the field.
Included in the Kit
- Sheet of 3mm ply parts
- Sheets of 5mm foam parts
- Landing gear wire
- Push rod wire
- Control horns
- Wooden dowel
- Rubber Wheels
- Vacuum formed canopy
- Instructions sheet
Spinner is not included, but can be purchased separately here.
Detailed Specs
Wingspan - 36" / 914.4mm
Build Skill Level - Beginner
Flying Skill Level - Beginner
Channels - 3 (throttle, ailerons and elevator)
Power System - Electric Brushless
Recommended Motor - Emax MT2215-1180KV
Propeller Size - 1045
Recommended ESC - Emax 30A
Recommended Battery - 1300mah-2200mah 3s Lipo
Servo Size - (3x) 9g
- Wingspan:
- 42" (1070mm)
Reviews
-
Service
Great service had 6 planes, from small spitfire to the large spitfire, every one has been Great easy to build good quality balsa wood thanks to all at vintage model's looking forward to receiving my new plans