Vintage Model Co
✓ In Stock
A Complete Airframe and Electronics Pack
This is a full aircraft and power electronics combo to build a Balsa Basics BF-109. If you want to get your electronics at the same time as your airframe kit, this is the bundle to get.
A Fearsom Fighter Made Fun
The Balsa Basics BF-109 is an intermediate level flyer that is easy to build and friendly to fly. Unlike other warbird models out there, this one has a very light wing-loading and gentle characteristics. Although not for beginner pilots (for that see the Balsa Basics Cub), this would make for a great first warbird. Like the real steel, the Balsa Basics Messerschmitt BF-109 is quick, clean and responsive in the air.
In addition to flying with ease, we have designed this model to go together flawlessly with no guesswork. Precision laser cut parts fit together to form the tapered wing of the 109 with the spar and doublers cleverly sandwiching each rib. Likewise, the fuselage is built up using self jigging components that interlock to form the nose and cockpit of the aircraft. Balsa fuselage sides and more formers bring the tail together to capture that iconic 109 feel in a simple yet effective way.
This fun-scale model of the BF-109 packs in just the right amount of detail: exhaust stacks, structural tail supports and a vacuum-formed plastic canopy are included as standard while a seperate Extra Details Kit is available for those who want to go the extra mile with finishing their model off. The aircraft can be covered and finished in a variety of ways to bring it to life.
Boxy but Beautiful
Straightforward construction results in a model that looks good on the ground and great in the air. It's just the amount of detail you need.
Easy Battery Access
There's plenty of room in here for 3s LiPo batteries up to a 2200 (which is the recommended size for this model).
To do away with complex, fradgile retracts, the Balsa Basics BF-109 is a belly lander meaning you can launch and land in a veriety of flying fields. A quick underarm hand toss and you're up in the air.
(Download alturnative written instructions as a PDF in the 'Aditional Resources' tab at the bottom of this page)
Unlike many of our other more complicated kits, the Balsa Basics BF-109 doesn't need to be built over a plan and can be constructed on a standard-sized kitchen table with some basic tools. All you need is to follow this video along step-by-step:
If you wish to supply your own radio and building supplies, here is what you will need to complete your BF-109:
Laser cut components (including 2x ply sheets, balsa sheets, balsa strip wood sheet, and thin ply sheet with control horns)
18swg (1.2mm) x 19 inch (480mm) piano wire pushrods (no z bend)
18swg (1.2mm) x 4 inch (100mm) piano wire aileron pushrods (no z
1/8th (3.175mm) x 9inch (230mm) hardwood dowel
1 x Vacuum-formed scale plastic canopy
4 x M3 T-nuts
4 x M3 bolts
12 x Mylar hinges
(In Electronics Pack box) 1 x Emax 2215 1180kv brushless outrunner motor
(In Electronics Pack box) 1 x Emax ESC (30A)
(In Electronics Pack box) 1 x XT60 Connector
(In Electronics Pack box) 1 x Emax 1045 Propeller
(In Electronics Pack box) 4 x Emax 9g Servo
(In Electronics Pack box) 8 x Linkages
(In Electronics Pack box) 2 x Servo Extensions
(In Electronics Pack box) 1 x Motor mount ‘X’ plate
Download written instructions for the Balsa Basics BF-109 here:Balsa Basics BF-109 Instructions